Product Description
Michigan Motorsports 7.525" Chromoly Pushrods
Set of 16 High-Strength 5/16" Chromoly Pushrods | 7.525" Length | .080" Wall Thickness | .125" Longer Than Factory LS Pushrods
Upgrade your LS valvetrain with Michigan Motorsports 7.525" Chromoly Pushrods. This complete set of 16 high-strength pushrods is designed for LS engine combinations that require a pushrod length .125" longer than the factory LS pushrod size. Built from SAE 4130 chromoly tubing, these one-piece precision-formed pushrods are centerless ground to exacting tolerances and case hardened to Rc 60 for excellent strength, durability, and valvetrain stability. With a 5/16" diameter and .080" wall thickness, these pushrods are a strong upgrade for camshaft swaps, cylinder head changes, valvetrain geometry corrections, performance engine builds, and higher RPM LS applications where stock pushrods may not provide the strength or length required.
Key Features & Benefits
- 7.525" Pushrod Length: These pushrods measure 7.525" long, making them .125" longer than factory LS pushrods. This length is commonly used when valvetrain geometry requires additional pushrod length due to camshaft changes, cylinder head work, lifter selection, deck height changes, or custom engine combinations.
- Complete Set of 16 Pushrods: Includes 16 high-strength chromoly pushrods for one complete V8 engine. This gives builders the correct quantity for a full LS valvetrain upgrade, camshaft installation, engine refresh, or pushrod length correction without piecing together individual components.
- SAE 4130 Chromoly Construction: Built from one-piece precision-formed SAE 4130 chromoly tubing for added strength and reliability compared to standard factory-style pushrods. Chromoly construction helps support better durability in engines with upgraded valve springs, larger camshafts, and increased valvetrain demands.
- 5/16" Diameter with .080" Wall Thickness: The 5/16" diameter and .080" wall thickness provide a strong balance of clearance, stiffness, and durability for many LS applications. Added pushrod strength helps reduce flex, improve valvetrain control, and support more consistent performance at higher RPM.
- Precision Ground & Case Hardened: These pushrods are centerless ground to exacting tolerances and case hardened to Rc 60 for a durable wear surface. This precision manufacturing helps support consistent length, dependable fitment, and long service life in performance LS valvetrain applications.
Notes
- Brand: Michigan Motorsports
- Quantity: Set of 16 pushrods.
- Pushrod Length: 7.525".
- Length Comparison: .125" longer than factory LS pushrods.
- Diameter: 5/16".
- Wall Thickness: .080".
- Material: One-piece SAE 4130 chromoly tubing.
- Finish / Hardness: Centerless ground and case hardened to Rc 60.
- Image Note: Pictures are representations; this listing is for the 7.525" length version of the pushrods shown.
- Recommended Use: LS camshaft swaps, valvetrain upgrades, pushrod length correction, cylinder head changes, lifter changes, performance engine builds, and high-RPM applications.
Key Fitments
- LS engine applications requiring 7.525" pushrods
- LS camshaft swap applications requiring .125" longer pushrods
- LS valvetrain upgrade applications using 5/16" pushrods
- Performance LS engine builds requiring .080" wall chromoly pushrods
- GM LS-based V8 applications with verified 7.525" pushrod length requirement
- Fitment note: Verify correct pushrod length before purchase.
