Texas Speed TSP Stage 3 Low Lift Truck Camshaft Vortec Truck Cam 3 Bolt Cam 4.8 5.3 6.0
These camshafts have a 3-bolt timing gear pattern.
Choose to include the Spring Kit with LS6 Single Beehive Valve Springs, Set of 16 Hat Seals and the Gasket Kit with Crank Bolt & Gaskets for Water Pump, Timing Cover, Front Seal and 7.400" Chromoly Pushrods
Texas Speed Stage 3 Low Lift 216/220, .550"/.550" Camshaft 112 LSA Camshaft. With a 112 Lobe Separation Angle (LSA).
This cam gained 53.4 HP and 22.0 TQ at the flywheel on our in-house SuperFlow 902 engine dyno using an otherwise stock 5.3L engine!
This cam uses proprietary TSP lobe profiles that are designed to utilize the factory GM LS6 single beehive valve springs and your factory pushrods, making them the most affordable cam package on the market!
1400-6000 RPM Power Band; This is an excellent performance camshaft with a slight lope at idle! We've had tons of customers select this camshaft when looking for a cam that drives well and can be daily driven without any issues! A mail-order or dyno tune will be required for optimum performance and excellent driving quality.
These cams are designed specifically for 4.8 5.3 6.0 combinations.
The Texas Speed Stage 3 Low Lift Truck Cam is an excellent choice for the Silverado or Sierra truck owner who is looking for a cam that will provide more power, while keeping that mild idle. You will not find a better price on a cam package than this one! Very economical with respectable horsepower and torque gains, and these camshafts will not be overly radical. Stage 2 and 3 cams may require custom tuning. Stage 1 cam may not require custom tuning, but it is recommended for optimal power and driving characteristics.
Check out the YouTube Video to view the Dyno Test in the Product Video Tab Section