Product Description
Texas Speed TSP Chopacabra LS Camshaft – Fits 4.8L, 5.3L, 6.0L & 6.2L
214/222 Duration | .550"/.550" Lift | 108° LSA | 3-Bolt Camshaft
Want an aggressive LS camshaft sound without choosing a profile that demands an aftermarket torque converter? The Texas Speed Chopacabra delivers the mean, snarling exhaust character its name promises in a cam designed to work with a factory converter. Built for GM Gen III and Gen IV LS-based combinations, the TSP Chopacabra is available by itself or with a PAC spring, valve seal and chromoly pushrod package. Choose the option that matches your engine and the supporting parts you need.
Key Features & Benefits
- Camshaft Specs: The Chopacabra features 214/222 intake/exhaust duration, .550"/.550" valve lift, a 108° lobe separation angle and a 3-bolt mounting pattern. Its lift profile was designed to work with LS6 valve springs, with a higher-pressure PAC spring package available for the combinations described below.
- Factory Torque Converter Compatibility: Keep a factory converter in your build plan while stepping up to the Chopacabra’s aggressive exhaust character. Texas Speed designed this camshaft to work with a factory torque converter—a key distinction for buyers who do not want a cam selection that requires a converter upgrade.
- PAC Springs For Heavier Valves & Boosted Builds: The optional PAC 1218 .600-inch beehive springs are recommended over LS6 springs for 2007-later 6.0L and 6.2L rectangle-port engines because of their heavier valves. They are also a recommended upgrade for turbocharged or supercharged cathedral-port combinations running this cam.
- Cam & Valvetrain Package: Select the camshaft, PAC springs, valve seals and pushrods option to receive the Chopacabra cam, PAC 1218 single beehive springs, tophat valve seals with integrated spring seats, and 7.400-inch-long, 5/16-inch-diameter chromoly pushrods. This option groups the specified supporting valvetrain components into one purchase.
- Optional Gaskets & Damper Hardware: Add the gasket kit option for a timing cover gasket, water pump gaskets, damper seal and crankshaft damper bolt. These service components are available as an option rather than being represented as included with every camshaft purchase.
Notes
- DOD/AFM Engines: A DOD/AFM conversion is required.
- VVT Engines: A VVT conversion kit is required to run this non-VVT camshaft.
- Factory 1-Bolt Camshaft Engines: A 3-bolt conversion kit is required. The Camshaft Only option includes the Chopacabra camshaft by itself; springs, seals, pushrods and the gasket kit depend on the options selected.
Key Fitments
Fits GM Gen III/IV LS-Based Engines With the Required Conversions Noted Above:
- LS1, LS2, LS3, LS6, LS4 and LSA
- L99, L92, L9H, L94, L76 and L77
- LY6, L96, LFA, LZ1, LQ4 and LQ9
- LY5, LMG, LMF, LH6, LC9, L33, LM7, L59, LH8 and LH9
- LY2, L20 and LR4