Product Description
Brian Tooley Racing BTR 400+ Cubic Inch Nitrous Camshaft V2
Specs: 247/27x Duration | .618"/.618" Lift | 112 LSA | 3-Bolt Pattern
Build your large-displacement LS nitrous combination around the Brian Tooley Racing 400+ cubic inch Nitrous Camshaft V2. Developed through years of back-to-back testing on 400+ cubic inch engines, primarily with TFS cathedral-port cylinder heads, this BTR camshaft combines a nitrous-focused profile with stable lobes for demanding drag-racing applications. Its 247/27x duration, .618-inch intake and exhaust lift, 112-degree lobe separation angle and 3-bolt mounting pattern are intended for a purpose-built engine equipped with aftermarket pistons with valve reliefs. Choose the camshaft alone or an available spring-and-pushrod package to suit your build.
Key Features & Benefits
- 400+ Cubic Inch Nitrous Profile: Developed specifically around large-displacement nitrous engine combinations. BTR's testing focused primarily on engines using TFS cathedral-port heads, making this camshaft a targeted option for builders assembling a 400+ cubic inch LS nitrous racing engine.
- Back-to-Back Tested Design: BTR reports greater power than similarly specified camshafts from other leading manufacturers during comparative testing. Reported track results include 5.30-5.50-second eighth-mile passes in a 3,000+ lb chassis, with some TFS 245-head combinations running 5.10-5.20 seconds.
- Stable Lobes for High-RPM Combinations: BTR reports operation to 7,500 rpm with its Platinum dual springs, SK001/SP001. Its specified 8,000-rpm configuration uses SP010-16 .685-inch lift springs shimmed to a 1.700-inch installed height, making spring selection an important distinction between these combinations.
- Tested with TFS Nitrous-Port Heads: BTR reports a 400-rwhp gain with a 300 shot of nitrous on a combination using TFS 245 heads with the N2O exhaust port. This is a reported result from that specific engine combination, rather than a guaranteed gain for every installation.
- Spring and Pushrod Package Options: Available packages pair the camshaft with BTR Platinum .660-inch dual springs, valve seals and 7.400-inch chromoly pushrods. Choose steel or titanium retainers, or select the camshaft alone when sourcing the remaining valvetrain components separately.
Available Kit Options
- Camshaft Only: BTR 400+ci Nitrous Camshaft V2 by itself.
- Steel Retainer Spring Kit with Pushrods: BTR 400+ci Nitrous Camshaft V2, BTR Platinum .660" dual spring kit with steel retainers, valve seals, and 7.400" chromoly pushrods measuring 5/16" in diameter with a .080" wall.
- Titanium Retainer Spring Kit with Pushrods: Includes the same components as the steel-retainer package, with titanium retainers substituted for the steel retainers.
- Gasket Kit Option: Includes timing cover gasket, water pump gaskets, front crankshaft seal and new damper bolt.
Notes
- Aftermarket pistons with valve reliefs are required.
- VVT engines require a VVT conversion kit. Engines originally equipped with a 1-bolt camshaft require a 3-bolt conversion kit.
- For 7,500+ rpm combinations, BTR specifies Johnson short-travel lifters and stock rocker bodies. BTR advises that heavier roller rockers limit achievable rpm compared with stock rocker bodies.
Key Fitments
- 400+ cubic inch LS nitrous engine combinations equipped with aftermarket pistons with valve reliefs.
- Developed primarily using TFS cathedral-port cylinder heads, including tested TFS 245 configurations.
Product Videos
Videos Hide Videos Show Videos
Custom Field
Product Reviews
1 Review Hide Reviews Show Reviews
-
In stock and out the door!
This company stocks it all, quick shipping and great to deal with.