NEW LS Rocker Arms with Trunion Bearings Professionally Installed
NEW Ls Rocker Arms have been disassembled and new Trunion Bearings have been professionally installed
New LS1 style bolts are included for installation.
Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor. We utilize LS rocker arms and install new LS1 rocker arm retro-fit trunion kit that replaces the cageless, loose OEM needle bearings and powdered metal trunion with a premium 8620 steel alloy trunion and caged roller bearings for added durability. The caged roller bearings that greatly reduce the possibility of the bearing failure experienced with stock LS1 needle bearings, which can send loose needles throughout the engine upon failure.
Fits all these applications: LS1/LS2/LS6/ LR4 Vortec 5300 LM7 L59 LM4 L33 – 4.8/5.3/5.7/6.0/ Engines
This kit includes:
16 LS Series Rocker Arms
16 rocker arm trunnions- LS-type retrofit
32 rocker arm bearings- LS-type retrofit
32 rocker arm retaining rings- LS-type retrofit
16 bolts for LS trunnion kit
the upgraded rocker arms to the cylinder heads using the new socket
head cap screws supplied. Be sure to rotate the trunion so that the
flat recess side of the trunion's center hole faces upward (the socket
head cap screw must seat against this recessed flat side of the hole).
Tighten the cap screw to a value of 22 ft-lbs, following the OE
9 Reviews Hide Reviews Show Reviews
Good quality and easy to install instructions are very clear. It is clear that these rocker arms are of good quality and meant to last
Nice upgrade to top off our DOD delete 5.3 great quality and design. Way better than stock. Very happy with these on our comp cam with Diablo tune 5.3. Not going to wear out like the factory design did.
Awesome rockers with simple instructions. Just bolt right in torque and your done.
Great product you guys, simple install and by just looking at the new trunion style it gives me confidence there will be no more failures such as the needle roller caged style has! I'm in the bottom end now, LIFTERS!!!
Great product, well built, reasonable price and got it very quick. I love it
Very good quality!
Great looking product!! Will definitely buy again..
Quick shipping, quality appearance of product and much easier install than pressing new trunions into the old rocker arms. 100% go for the complete unit as opposed to just buying the trunions. No worry of needle bearings blasting all over my engine when I bounce it off rev limiter. The Allan head bolts are also a lot nicer than the factory 8mm he's head. Over all good buy for the price.