Product Description
Michigan Motorsports Multipurpose 3 Wire Pigtail for GM Chrysler Dodge Mopar Jeep Applications
Replaces S738 4897087AA 5014007AA 5014007AB 88953349 | Multi-Use 3 Wire Sensor Connector Repair Harness
Repair damaged sensor wiring with the Michigan Motorsports Multipurpose 3 Wire Pigtail, designed for a wide range of GM, Chrysler, Dodge, Mopar, Jeep, Mitsubishi, Plymouth, Mini, and other applications. This common 3-wire connector is used across multiple vehicle systems including crankshaft position sensors, oil pressure switches, vehicle speed sensors, transmission output speed sensors, vapor canister components, clutch pedal position switches, and ignition coil connectors. Built as a dependable repair solution, this pigtail helps restore proper electrical connection without replacing an entire wiring harness. Always compare the connector shape, keyway, terminal layout, cross-reference numbers, and product photos to confirm proper fitment before ordering.
Key Features & Benefits
- Versatile 3-Wire Repair Connector: Designed for multiple automotive sensor and switch applications, making it a practical solution for repairing damaged, brittle, corroded, or missing factory connectors. This is especially useful for older GM, Chrysler, Dodge, Mopar, and Jeep vehicles where factory harness ends commonly become heat-damaged or worn over time.
- Wide Application Coverage: Commonly used for crankshaft position sensors, oil pressure switches, vehicle speed sensors, transmission output speed sensors, vapor canister connectors, clutch pedal position switches, and ignition coil connectors. One connector style can service many different systems depending on the vehicle, making it a valuable repair pigtail to keep on hand.
- Restores Reliable Electrical Signal: A damaged connector can cause poor sensor readings, intermittent faults, no-start issues, speedometer problems, transmission shift concerns, ignition problems, or check engine lights. Replacing the failed connector helps restore proper signal transfer between the sensor and the vehicle wiring harness.
- Ideal for Harness Repairs: Perfect for technicians, DIY repairs, engine swaps, restorations, and custom wiring projects where the factory connector is no longer usable. This pigtail allows you to repair the affected connector end without replacing a larger section of the vehicle’s wiring harness.
- Cross-Reference Friendly: Replaces several commonly searched connector part numbers, making it easier to match this pigtail to your original application. Because this connector was used in many different systems and vehicles, checking the listed cross-reference numbers and connector photos is the best way to confirm compatibility.
Notes
- Replaces: S738, 4897087AA, 5014007AA, 5014007AB, 88953349
- Connector Style: Multipurpose 3 wire pigtail for various GM, Chrysler, Dodge, Mopar, Jeep, and other applications.
- Important Fitment Note: Fits the applications below as well as many others. Please cross-reference the part numbers above and compare the product pictures to your existing connector to ensure proper fitment before purchasing.
Key Fitments
- Engine Crankshaft Position Sensor:
- 2004-2006 Cadillac SRX STS 3.6L
- 1998-2007 Town & Country 3.3L 3.8L
- 1995-2006 Chrysler Sebring
- 2004-2007 Chrysler Pacifica
- 2001-2010 PT Cruiser 2.4L
- 2000-2003 Chrysler Voyager 2.4L 3.0L 3.3L
- 2000-2004 Chrysler 300M 3.5L
- 1995-1998 Eagle Talon 2.0L
- 1995-1999 Mitsubishi Eclipse 2.0L 2.4L
- 1996-2009 Dodge Caravan & Grand Caravan
- 2000-2004 Dodge Intrepid
- 1995-2005 Dodge Neon 2.0L 2.4L
- 2003-2006 Dodge Ram
- 1995-2006 Dodge Stratus
- 1995-1999 Dodge Avenger
- 2002-2011 Jeep Wrangler
- 1996-2000 Plymouth Voyager
- 1995-2001 Plymouth Neon 2.0L
- 1996-2000 Plymouth Breeze 2.0L 2.4L
- Engine Oil Pressure Switch:
- 2004-2017 Dodge Ram
- 2011-2016 Dodge Journey
- 2006-2016 Dodge Charger
- 2004-2016 Dodge Durango
- 2008-2016 Dodge Challenger
- 2013-2016 Dodge Dart
- 2011-2014 Dodge Avenger
- 2011-2016 Dodge Caravan
- 2003-2016 Dodge Viper
- 2002-2006 Jeep Liberty
- 2005-2016 Grand Chrerokee
- 2011-2016 Chrysler 200
- 2011-2016 Chrysler Town & Country
- 2005-2016 Chrysler 300
- Vehicle Speed Sensor / Trans Output Speed:
- 1995-1998 Eagle Talon FWD
- 1994-1999 Mitsubishi Eclipse FWD
- 2001-2004 Chrysler Sebring
- 1993-1995 Chrysler Lebaron
- 2001-2008 PT Cruiser
- 1993-2001 Dodge Caravan
- 1994-1997 Dodge Dakota
- 1994-1999 Grand Caravan
- 1995-2005 Dodge Neon
- 1994-1997 Dodge Ram 1500 Manual Transmission
- 1995-2005 Dodge Stratus
- 1993-1999 Jeep Grand Cherokee
- 1993-2001 Jeep Cherokee
- 1994-2006 Jeep Wranger
- 1994-2000 Plymouth Voyager
- 1996-2000 Plymouth Breeze
- 1995-2001 Plymouth Neon
- Vapor Canister:
- 2002-2004 Chrysler 300M 3.5L
- 2002-2004 Chrysler Sebring 2.4L 2.7L 3.0L
- 2002-2004 Chrysler Concorde 2.7L 3.5L
- 2003-2006 Dodge Stratus 2.4L 2.7L 3.0L
- 2006 Dodge Ram 5.7L
- 2002-2004 Dodge Intrepid 2.7L 3.5L
- Clutch Pedal Position Switch:
- 2009-2016 Dodge Journey
- 2007-2012 Dodge Caliber
- 2000-2005 Dodge Plymouth Neon
- 2007-2017 Jeep Patriot
- 2007-2017 Jeep Compass
- 2002-2005 PT Cruiser
- Ignition Coil Connector:
- 1995-1998 Eagle Talon Mitsubishi Eclipse 2.0L 2.4L
- 2002-2005 Jeep Liberty 2.4L 2.8L
- 2003-2006 Jeep Wrangler 2.4L 4.0L
- 2001-2010 PT Cruiser 2.4L
- 1995-2000 Chrysler Cirrus
- 2000-2003 Voyager
- 1995-2006 Chrysler Sebring
- 1995-1999 Dodge Avenger
- 1995-2005 Dodge Neon 2.0L 2.4L
- 1997-2006 Dodge Viper
- 1995-2006 Dodge Stratus 2.0L 2.4L
- 1996-2007 Dodge Caravan 2.4L 3.0L 3.3L 3.8L
- 1997-2003 Dodge Ram 2500/3500 8.0L V10
- 2002-2008 Mini Cooper 1.6L
- 1995-2001 Plymouth Neon 2.0L
- 1996-2000 Voyager & Grand Voyager
- Fits the applications above as well as many others - Please see cross reference numbers and pictures to ensure fitment.